Skip to end of banner
Go to start of banner

Connecting to Storage from Linux

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 173 Next »

Using mount

This was tested on Ubuntu 16.04 with mount.cifs version 6.4 which is part of the cifs.utils package

Install cifs.utils:

sudo apt-get install cifs.utils

Use the id command do find the local user’s uid and gid, optional:

id

uid=1000({local user name}) gid=1000({local user group}) groups=1000({local user group}),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),110(lpadmin),111(sambashare),119(libvirt)

Issue the mount command with proper options and credentials:

mount -t cifs -o vers=3.0,uid=1000,gid=1000,credentials=/tmp/.auth //storage1.ris.wustl.edu/${VOLUME_NAME} /mnt

If using a credentials file, be sure to format as follows, removing any line whitespace:

username=<WUSTL KEY ID>
password=<WUSTL KEY PASSWORD>
domain=ACCOUNTS.AD.WUSTL.EDU

Variable replacement

  • ${VOLUME_NAME} should be replaced with the name of your Storage Platform volumn.

  • <WUSTL KEY ID> should be replaced with your Wustl key ID.

  • <WUSTL KEY PASSWORD> should be replaced with the password associated with your Wustl key.

Using smbclient

Install samba-client

In the Debian family of operating systems (e.g. Debian, Ubuntu, etc.)

sudo apt-get update && sudo apt-get install -y samba-client

In the RedHat family of operating systems (e.g. RedHat, CentOS, etc.)

sudo yum install -y samba-client

Empty the default samba configuration

sudo truncate -s 0 /etc/samba/smb.conf

Record your credentials in a file with restricted permissions
cat > secret <<EOF
username=<WUSTL KEY ID>
password=<WUSTL KEY PASSWORD>
domain=ACCOUNTS.AD.WUSTL.EDU
EOF
chmod 0600 secret

Variable replacement

  • <WUSTL KEY ID> should be replaced with your Wustl key ID.

  • <WUSTL KEY PASSWORD> should be replaced with the password associated with your Wustl key.

Use smbclient to connect to storage with the SMB3 protocol to your storage volume.

smbclient -A secret -m SMB3 //storage1.ris.wustl.edu/${VOLUME_NAME} -c ls

Domain=[ACCOUNTS] OS=[] Server=[]
  .                                   D        0  Wed Jan 31 10:35:05 2018
  ..                                  D        0  Wed Jan 31 12:40:03 2018
  Active                              D        0  Wed Jan 31 12:09:39 2018
  .snapshots                        DHR        0  Mon Jan 29 15:22:55 2018

      5368709120 blocks of size 1024. 5363531776 blocks available

Or, to avoid recording credentials in a file:

smbclient -W ACCOUNTS -U <WUSTL KEY ID> -m SMB3 //storage1.ris.wustl.edu/${VOLUME_NAME} -c 'ls'

Variable replacement

  • ${VOLUME_NAME} should be replaced with the name of your Storage Platform volumn.

  • <WUSTL KEY ID> should be replaced with your Wustl key ID.

Enter ACCOUNTS\$USER password

Domain=[ACCOUNTS] OS=[] Server=[]
  .                                   D        0  Wed Jan 31 10:35:05 2018
  ..                                  D        0  Wed Jan 31 12:40:03 2018
  Active                              D        0  Wed Jan 31 12:09:39 2018
  .snapshots                        DHR        0  Mon Jan 29 15:22:55 2018

      5368709120 blocks of size 1024. 5363531776 blocks available

Use smbclient to PUT data into storage

smbclient -A secret -m SMB3 //storage1.ris.wustl.edu/${VOLUME_NAME} -c 'cd Active; put somefile;'

Domain=[ACCOUNTS] OS=[] Server=[]
putting file somefile as \Active\somefile (69719.1 kb/s) (average 69719.1 kb/s)

Variable replacement

  • ${VOLUME_NAME} should be replaced with the name of your Storage Platform volumn.

  • No labels