1. Purpose

This document is meant for the administrators of the BioMS application. This document describes the process of deploying the BioMS application and regular administration activities to be performed on the BioMS application.

...

Follow the same steps give in Section 3.3 substituting all bioms-bioms-node1 with bioms-bioms-node2 to setup second node of the BioMS cluster.
Start the BioMS Node with the command
run.sh –b0.0.0.0 –cbioms-bioms-node2 -u 239.255.100.100 –gBioMSPartition -Djboss.messaging.ServerPeerID=2

Make sure the -u and -g options values are matching with the values used in starting node1.

Once the bioms-node2 server is started make sure bioms-node2 bioms is accessible at http://<bioms-node2-server>:8080/bioms

...

 # Define list of workers that will be used
 # for mapping requests
 worker.list=loadbalancer,status
 
 # Define Bioms-node1
 # modify the host as your host IP or DNS name.
 worker.bioms-bioms-node1.port=8009
 worker.bioms-node1.host=<bioms-node1-host> 
 worker.bioms-node1.type=ajp13
 worker.bioms-node1.lbfactor=1
 worker.bioms-node1.cachesize=10
 
 # Define Bioms-node2
 # modify the host as your host IP or DNS name.
 worker.bioms-node2.port=8009
 worker.bioms-node2.host=<bioms-node2-host> 
 worker.bioms-node2.type=ajp13
 worker.bioms-node2.lbfactor=1
 worker.bioms-node2.cachesize=10
 
 # Load-balancing behaviour
 worker.loadbalancer.type=lb
 worker.loadbalancer.balance_workers=bioms-node1,bioms-node2
 worker.loadbalancer.sticky_session=1
 #worker.list=loadbalancer
 
 # Status worker for managing load balancer
 worker.status.type=status

9. CTEP Authentication Setup

...